The SIP panels are going up

This panel has a cutout for a door and window. Unfortunately the door opening is 2" too narrow! No room for vertical lumber. Premier?? Another fix.

These windows were all suppossed to have the same height above the floor. Note the one on the right is 2" lower. We'll have to fix this. Sigh...

.

The cutout for the door opening in photo #1 is 2" too narrow!  No room for vertical lumber.  The door needs a full length solid piece to latch against.  John will have to cut out the short vertical piece, re-notch the panel (Premier provided a hot-wire tool for this) and install a full length piece of lumbar.  What was Premier thinking??